Metabo Spindle Moulder TF 100 M Instrukcje Operacyjne Pobierz pdf (Strona 7)

13.3 Spindle Speed Setting/Changing

Tighten the belt and replace the plas-

tic guard.

Remove the plastic cover to have

access.

Loosen the ratchet lever and place

belt on the desired step of the pulleys.

Available speeds are:

top = 4000 min

-1

centre = 6000 min

-1

lower = 7500 min

-1

13.5 Fence And Fence Plate Setting

Caution!

Switch machine off and let tool come

to a complete stop before making any

adjustments.

Loosen the starknobs (B) to reposi-

tion the fence plates.

Loosen both starknobs (A) to move

the fence forward or backwards.

13.4 Tool Height Setting

If the tool is only partially used and

needs to be lowered below the table,

remove the table rings before moun-

ting it on the spindle.

Spindle vertical adjustment is

achieved by turning the handwheel

inside the main frame. Turn

- clockwise to raise

- counter-clockwise to lower

After a spindle height adjustment lock

in position by engaging the spindle

lock lever.

Caution!

Switch machine off and let tool come to a complete stop before making any adjustments.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Brak uwag

Metabo Spindle Moulder TF 100 M Instrukcje Operacyjne Strona 7